2021-11-09

Characteristics of slot mixer

The mixer unit rotates the S-shaped stirring paddle through mechanical rotation to drive the material to move back and forth and evenly mix. The operation is controlled by electrical appliances, and the mixing time can be set. When the time comes, the machine automatically stops to improve the mixing quality of each batch of materials. The trough mixer is powered on, set the mixing time, press the switch, and rotate the animal material through mechanical transmission to obtain a uniform mixed product. The entire machine is made of all stainless steel, which is easy to use and suitable for industries such as pharmaceuticals, chemicals, and food. The characteristics of a slot mixer: The mixing of liquids mainly relies on mechanical mixers, airflow, and the spraying of the liquid to be mixed, so that the materials to be mixed are stirred evenly. Stirring causes some liquid to flow, and the flowing liquid drives the liquid to flow around it. As a result, a circulating liquid flow is formed in the dissolver. The diffusion between liquids generated by this is called main convection diffusion. For liquids with different densities and compositions that are not miscible with each other, the shear effect and strong turbulence generated by stirring tear the high-density liquid into small droplets, making it evenly dispersed in the main liquid. The flow rate of the liquid generated by stirring must be greater than the settling speed of the droplets.

View Article →

2021-11-09

Installation and maintenance of mixer and granulator

1. After the mixer is in place, it must be placed smoothly and fixed with foundation screws. 2. Before debugging, clean the inner chamber of the mixer and lock the front cover with a star shaped handle. 3. After turning on the power, pay attention to its phase sequence and rotate the spindle in the direction shown. 4. During debugging, pay attention to any abnormal noise inside the mixer for timely inspection. 5. Install the storage bag in the discharge hopper. Mixer maintenance knowledge 1. The lubrication finger on the bearing seat of the mixer should be replaced regularly. 2. The temperature rise of the mixer bearing seat shall not exceed 35 ℃. 3. Do not arbitrarily remove the electrical appliances and belt protective covers of the mixer. Introduction to Installation and Maintenance of Granulator 1. Maintenance of the granulator: 1. The bearing bears all the load of the granulator, and good lubrication is closely related to the service life of the bearing. It directly affects the service life and operating rate of the granulator. Therefore, it is required that the injected lubricating oil be clean and well sealed. The main oil injection positions of the granulator (1) rotating bearings (2) roller bearings (3) all gears (4) movable bearings and sliding surfaces 2. Newly installed tires are prone to loosening and must be checked regularly 3. Pay attention to whether all parts of the granulator are working properly 4. Pay attention to checking the wear level of vulnerable parts and replace them at any time

View Article →